Ameriphone DIALOGUE XL-50 operating instructions Incoming Voice Tone Ringer Volume and Pitch, Hold

Using Your Dialogue XL-50 (Continued)

Incoming Voice Tone

Ringer Volume and Pitch

The Dialogue XL-50 provides extra amplification at the sound frequency you need to boost. To identify the sound frequency range that best suits your needs, follow these steps:

1.When you hear a voice on the line, press the AMPLIFY button shown in Figure 8.

2.Adjust the TONE slide control in Figure 11 to suit your hearing.

HOLD*PROG	0	P		#
		E
			FLASH	REDIAL
TONE	AMPLIFY			VOL
LO	HI

Figure 11 - Tone Slide Control

1.You can adjust the RINGER VOLUME as high as 95+ decibels. The settings available are LO, MED and HI as shown in Figure 12.

HOLD	PROG	FLASH	REDIAL
TONE		AMPLIFY	VOL
	LO

Figure 13 - Hold Button and Indicator

2.The RING TONE has two pitch settings: LO and HI.

Hold

To put the line on hold, press the HOLD button and return the handset to its cradle. You will notice the HOLD indicator light comes on.

Note: If you pick up an extension phone on the same line when the Dialogue XL- 50 is on HOLD, the Dialogue XL-50 will disconnect and you can continue your conversation on the extension phone.

RINGER	RINGER PITCH		AUDIO
Lo Med Hi	Lo Hi	T P	OUTPUT

Figure 12 - Ringer Volume & Pitch

7