Ameriphone DIALOGUE XL-50 Setting up Your Dialogue XL-50, Installing the Backup Batteries

Setting up Your Dialogue XL-50

There are five steps involved in set- ting up your Dialogue XL-50.

•Insert four AA alkaline batteries for back-up in case of AC power outage.

•Decide if you want the phone to sit on a desk or hang on the wall.

•Connect the telephone components.

•Program up to to 12 telephone numbers to call with the press of a memory button.

•Setup special features

Installing the Backup Batteries

If there is a power outage, the Dialogue XL-50 will operate for up to 48 hours with four AA alkaline back- up batteries (not included). If the phone is not in use, the batteries will stay charged for several months.

Insert batteries here

Press in

here to open

battery compart-

ment

Figure 3 - Accessing the Batteries

To install new batteries:

1.Slide open the battery compart-- ment cover on the bottom of the telephone (Figure 3).

2.Install four fresh batteries. Be sure to observe battery polarity as imprinted on the base of the compartment. The battery indi- cator on the top panel will light up if the batteries are running low.

The phone operates as a regular phone if there is no power or battery.

XL-50 Low Battery Indicator

If the batteries in the are weak or not installed the low battery indicator will light up. Install fresh batteries accord- ing to the directions above.

HOLD PROGFLASH REDIAL

TONE	AMPLIFY
	VOL
LO	HI

Figure 4 - Low Battery Indicator

Connecting for Desk or Wall Mount

Set the dial mode switch to T (tone) if you have touch tone service. Set the switch to P (pulse) if you have rotary dialing.

4