Keyboard Installation and Operation
13
5200 User’s Manual
Keyboard
Operation The IR remote Control keystrokes can be simulated using the IR Keyboard. The following i s
a list of projector commands using the Keyboard.
NOTE: The IR Remote Control key equivalent is represented in parenthesis ( )Keystrokes Description
POWER ( ): Press <Ctrl> <Alt> <P> keys simultaneously to power
the display engine “on”.
2nd Function: Use <Ctrl> <Alt> <P> to toggle between available
sources.
POWER OFF: Use the <Ctrl> <Alt> <Q> key sequences to explicitly
power-off the display.
STANDBY: ( ): Press <Ctrl> <Alt> <S> keys simultaneously to toggle
the projected image On/Off (Video Mute command).
DISPLAY OSD MENU: ( ): Use the <Enter> key to initially display
the on-screen-display (Main Menu)
SELECT: After scrolling through the menu commands, press <Enter>
to select the highlighted function for activation or additional options.
SCROLL: If a command employs an active list window, use the
<Enter> key to scroll through the options.
SCROLLING: Use the keyboard arrow keys to scroll between options
listed in secondary windows and boxes. When an adjustment meter is
employed, use the arrow keys to perform the desired adjustment.
<Fn> FUNCTION: In addition, use the <Fn> key to enable the
keystroke function denoted within the boxed area, i.e., When a window
is present that uses the scroll bars, pressing <Fn><Home> will jump to
the beginning of the list. Likewise, pressing <Fn><End> will jump to
the end of the list.
ADJUSTMENT: Certain functions use the keyboard arrow keys to
increase and decrease the active function levels. Again, the
<Fn><Home>/<End> keys work similar as described above.
The following keyboard commands are used to select a particular channel or source without the use of the on-
screen menus.
CHANNEL SELECT: The <Ctrl><Alt><C> command allows the user
to enter the “waiting for channel selection.” After entering the initial
command, the user enters<Ctrl><Alt>, then selects a desired channel
number between 1 and 9.
SOURCE SELECT: Entering <Ctrl><Alt><U> places the projector into
the “waiting for source command.” After the initial command. The user
enters <Ctrl><Alt>, then the desired source number, see below
<1> = RGB1
<2> = RGB2
<3> = Video
<4> = S-Video
<5> = Internal