ALICE Help Guide 1
54
5200 User’s Manual
BIOS
Configuration Press <Delete> to enter the main BIOS screen and check the following parameters
IDD HDD AUTO DETECTION
Select the setting that includes LBA mode
Press <Enter> three more times and answer NO to each prompt.
STANDARD CMOS SETUP
Be sure primary type = user, mode = LBA, and reported drive size corresponds to
actual drive size.
Enter correct date and time
Set HALT ON to NO ERRORS
Set drive A to 1.44M, 3.5 in.
Set VIDEO to EGA/ VGA
BIOS FEATURES SETUP
Boot sequence is C, A
Boot UP Num Lock is
OFF
P/S2 mouse function is
enabled
Exit to Main menu
CHIPSET FEATURES SETUP
Auto confi guration is
enabled
DRAM timi ngs i s 60ns
System cacheable is
enabled
Video BIO S cacheable is
enabled
Exit to Main menu
POWER MANAGEMENT SETUP
Power Management is
disabled
Exit to Main menu
PNP/PCI Configuration
Resources Controlled By is
Auto
Exit to Main menu
INTERGRATED PERIPHERALS
IDE HDD Block mode;………….….………..….
enabled
IDE PIO for all four ports;………….………..….
enabled
On Chip Primary and Secondary PIO;…….….
enabled
PCI slot IDE 2nd channel;………….………..….
disabled
Onboard FDC controller;………….………..…..
enabled
Onboard UART1;………….………..…………..
3F8, IRQ4
Onboard UART2;………….………..…………..
2F8, IRQ3
Onboard Parallel Port;………….………..…….
378, IRQ7
Parallel Part Mode;………….………..………..
normal or SPP
Exit to Main menu
Select SAVE & EXIT, then enter “Y” to the resulting dialog box. System will now re-boot.