AMX ENV-VST-C manual Entering Location by Station ID, Changing Temperature Units

Programming

Entering Location by Station ID

To enter a location by Station ID:

1.Press Weather on the Main page to navigate to the Settings screen (FIG. 62).

2.Press Station. A pop-up screen opens.

3.Enter the 4-character Station ID.

4.Press Done.

Changing Temperature Units

The i!-Weather application uses the same temperature units that your thermostat uses. Changing the temperature units in the i!-Weather application does not change the temperature units on the thermostat, it changes the reported temperature scale in the i!-Weather application. To change temperature units:

1.Press Weather on the Main page to navigate to the Settings screen (FIG. 62).

2.In the Temperature Units area, press °F for Fahrenheit or °C for Celsius. Next time a weather refresh occurs the units will be updated.

Changing Wind Speed Units

To change wind speed units:

1.Press Weather on the Main page to navigate to the Settings screen (FIG. 62).

2.In the Wind Units area, press MPH (Miles per hour), KPH (Kilometers per hour), or Knots. Next time a weather refresh occurs the units will be updated.

Changing Pressure Units

To change pressure units:

1.Press Weather on the Main page to navigate to the Settings screen (FIG. 62).

2.In the Pressure Units area, press inHg (Inches of Mercury), mmHg (Millimeters of Mercury), or Millibars. Next time a weather refresh occurs the units will be updated.

Auto Refresh Interval Select

To select an auto refresh interval:

1.Press Weather on the Main page to navigate to the Settings screen (FIG. 62).

2.In the Refresh Interval area, select the desired auto refresh time interval.

Auto Refresh refreshes weather data for the current weather location.

You can access the Wind screen by pressing Weather on the Main page, then pressing the Wind tab.

FIG. 63 Wind screen
ENV-VST-C - Operation / Reference Guide	67