Installation and Wiring

Removing the Faceplate from the Base

No tools are required to disassemble the thermostat - simply use your hands to pull the front panel off of the base.

Loss of internal programs may result from static discharge to the thermostat circuit board. Touch a grounded metal object to discharge any static charge before handling the circuit board.

Mounting the Base to a Wall

You should only mount the ViewStat Color Communicating Thermostat onto a sheetrock wall with the anchors and screws provided with the unit. There are four screw holes located on the base of the thermostat.

1.Place the base over the wire hole opening in the wall. Level the base (leveling required for appearance only) and mark the screw hole mounting locations.

2.Using the supplied wall anchors, drill 1/4" hole in the center of the marked locations, and tap the wall anchors into the holes. If using the supplied screws only, drill a 3/32" hole in the center of the marked locations.

Minimize the wire entry hole size and seal. Drafts from inside the wall could affect temperature readings.

3.Fasten the base to the wall with the supplied screws.

4.Seal the wire entry with caulk, drywall putty, or insulation.

Wiring the Thermostat

A qualified HVAC technician should perform these steps to ensure proper termination.

1.Make sure the HVAC system power is off.

2.Strip 1/4" (0.63 cm) of insulation from each wire you are using.

3.Secure the wires into the terminals on the base according to the appropriate wiring diagram, as described below. Refer to the Wiring Diagrams on page 7.

Use color-coding practices (i.e. white wire to W terminal) whenever possible.

Single Stage Furnace and Single Stage A/C - Refer to the Single Stage Furnace and Single Stage A/C on

page 7.

Dual Stage Furnace and Dual Stage A/C - Refer to the Dual Stage Furnace and Dual Stage A/C on page 8.

Roof Top Unit with Dual Stage Heat and Dual Stage Cool - Refer to the Roof Top Unit with Dual Stage Heat and Dual Stage Cool on page 9.

Boiler with A/C with Separate Transformers - Refer to the Boiler and A/C with Separate Transformers on

page 10.

Single Stage Heat Pump - Refer to the Single Stage Heat Pump on page 11. Two Stage Heat Pump - Refer to the Two Stage Heat Pump on page 12.

First Stage Radiant Floor Heat, Second Stage Furnace One Stage of Cooling - Refer to the First Stage Radiant Floor Heat, Second Stage Furnace with Single Stage Cooling on page 13.

4.Check each wire to ensure it is securely fastened, not broken, and any exposed wires are not touching each other.

4

ENV-VST-C - Operation / Reference Guide

Page 9 Page 11
Page 10
Image 10
AMX ENV-VST-C manual Wiring the Thermostat, Removing the Faceplate from the Base, Mounting the Base to a Wall
Page 9 Page 11

ENV-VST-C specifications

The AMX ENV-VST-C is an advanced video streaming and encoding solution designed to meet the needs of modern broadcasting and professional video applications. Known for its high-performance capabilities and seamless integration into existing systems, the ENV-VST-C stands as a reliable choice for content creators, broadcasters, and businesses alike.

One of the main features of the AMX ENV-VST-C is its ability to support a wide range of video formats and resolutions. The device is capable of encoding and streaming in 4K, Full HD, and SD resolutions, ensuring that users can produce high-quality content regardless of their specific requirements. This versatility makes it suitable for various applications, including live event streaming, corporate communications, and even online educational platforms.

The ENV-VST-C utilizes state-of-the-art encoding technologies, such as H.264 and H.265, providing users with high-quality video while optimizing bandwidth usage. H.265, in particular, allows for significantly smaller file sizes compared to H.264, all without sacrificing video quality. This efficiency is crucial for users looking to reduce costs associated with bandwidth and storage, especially in environments where video distribution is critical.

Another key characteristic of this encoder is its user-friendly interface. The AMX ENV-VST-C features an intuitive control panel and web interface that allows users to configure settings, monitor performance, and manage live streams effortlessly. This ease of use is essential for operators who may not have in-depth technical knowledge but need to manage complex streaming tasks efficiently.

In addition, the AMX ENV-VST-C supports multiple streaming protocols, including RTMP, RTSP, and MPEG-TS. This capability enables seamless integration with various content delivery networks (CDNs) and ensures that users can reach their audience effectively across different platforms.

Moreover, the device is designed with reliability in mind. It offers features such as redundant power supplies and advanced cooling systems, which help maintain optimal performance even in demanding environments. This reliability is crucial for live streaming applications, where any downtime can result in significant loss of engagement and revenue.

In conclusion, the AMX ENV-VST-C stands out with its robust feature set, cutting-edge technologies, and user-centric design. Whether you are in broadcasting, corporate communication, or education, this encoder provides the performance and flexibility needed to deliver exceptional video content. With its commitment to quality and efficiency, the AMX ENV-VST-C is a valuable asset for anyone looking to enhance their video production capabilities.
Top Page Image Contents