SHARC USB EZ-Extender Manual ix
Preface
Purpose of This Manual
The SHARC USB EZ-Extender Manual describes the operation and con-
figuration of the components on the extension board. A schematic and a
bill of materials are provided as a reference for future SHARC processor
board designs.
Intended Audience
This manual is a user’s guide and reference to the SHARC USB
EZ-Extender. Programmers who are familiar with the Analog Devices
SHARC processor architecture, operation, and development tools are the
primary audience for this manual.
Programmers who are unfamiliar with VisualDSP++ or EZ-KIT Lite eval-
uation software should refer to the ADSP-21262, ADSP-21364, or
ADSP-21369 Evaluation System Manual, VisualDSP++ online Help, and
user’s or getting started guides. For the locations of these documents, refer
to “Related Documents”.
Manual Contents
The manual consists of:
• Chapter 1, “USB EZ-Extender Interface” on page 1-1
Provides basic board information.
• Chapter 2, “USB EZ-Extender Hardware Reference” on page 2-1
Provides information on the hardware aspects of the board.
• Appendix A, “USB EZ-Extender Bill Of Materials” on page A-1
Provides a list of components used to manufacture the
EZ-Extender board.