Analog Devices 82-003536-01 Evaluation Tools, USB 1.0 or high-speedUSB 2.0 port on the host PC

Evaluation Tools

These easy-to-use USB-based emulators perform a wide range of emula- tion functions, including single-step and full-speed execution with predefined breakpoints, and viewing and/or altering of register and memory contents. With the ability to automatically detect and support multiple I/O voltages, the HP-USB emulator enables you to communicate with all of the Analog Devices JTAG processors using a full-speed

USB 1.0 or high-speed USB 2.0 port on the host PC.

Applications and data can be tested and transferred easily (and rapidly, when the HP-USB emulator is connected to a high-speed USB 2.0 port on your host PC) between the emulators and the separately available Visu- alDSP++ development and debugging environment.

The plug-and-play architecture of USB allows the emulators to be auto- matically detected and configured by the host operating system. It can also be connected to (and disconnected from) the host without opening the PC or turning off the power to the PC. A 3-meter (9-foot) cable is included to connect the emulators to the host PC, thus providing abundant accessibility.

As a bonus, customers in an environment that does not allow them to open their PCs without IS support will find that both emulators eliminate the need to obtain that help and thus can be easily moved from the lab to the local desktop to the laptop.

Features

•High-speed USB 2.0 (backward compatible with full-speed USB 1.1) interface and connector

•JTAG clock operation from 10 MHz to 50 MHz

•Support for all ADI JTAG processors

•Multiple processor I/O voltage support with automatic detection

•1.8 V, 2.5 V, and 3.3 V compliant and tolerant

2-56 Getting Started With SHARC Processors