Analog Devices ADSP-21364 system manual LEDs and Push Buttons, Loop-Back Test Switch SW11

ADSP-21364 EZ-KIT Lite Hardware Reference

Loop-Back Test Switch (SW11)

The loop-back test switch (SW11) is located at the bottom of the board. This switch is used for testing; all switch positions should remain OFF.

LEDs and Push Buttons

This section describes the functionality of the LEDs and push buttons. Figure 2-6shows the LED and push button locations.

Figure 2-6. LED and Push Button Locations

ADSP-21364 EZ-KIT Lite Evaluation System Manual 2-13