Antex electronic XM-100 owner manual ?Setup Indicator - illuminated when in Setup Mode

The default display, as shown below, provides information about the channel currently tuned to, including channel number and channel name on the first line and scrolling artist name and song title on the second line.

The display backlight is illuminated and text appears after the power button has been pressed, indicating the unit is on.

The XM-100 has four indicators and four buttons as follows (Modes are described below):

?Power Indicator – illuminated whenever power present

?Setup Indicator – illuminated when in Setup Mode

?CHAN Indicator – illuminated when in Channel Mode. Both CHAN and CAT indicator illuminated in Channel/category Mode.

?CAT Indicator – illuminated when in Category Mode. Both CHAN and CAT indicator illuminated in Channel/category Mode.

?Power Button – turns unit on/off. Hold for signal strength. Press to exit setup menus.

?Mode Button – cycles operational Mode of unit through Channel, Category, Channel Category, or Setup. Holding for 4 seconds enters Setup Mode.

?Up and Down Buttons – changes channels and used for menu navigation.