Antex electronic owner manual Operating the XM-100

After the channel 1 audio verification test, you must activate your XM-100 to access all XM channels. Commercial accounts must sign up for and activate under the terms of XM’s Commercial Service.

To activate the radio you must first obtain the XM Radio ID number of your unit. Tune the receiver to channel 0 by using the down button on the unit’s front or press 0 on the remote control. The 8 digit XM Radio ID will be displayed.

Record the 8 character ID in the space below, noting that letters I, O, S and F are not used and that the number zero has a line running diagonally through it.

XM Radio ID: _________________________

Activate your XM radio service by calling XM at 1-800-XM- RADIO (1-800-967-2346). Commercial accounts cannot be activated via the Internet. A friendly listener care representative will assist you in activating your unit. Customers should have their Radio ID ready; the Radio ID can be found by selecting channel 0 on the radio.

Operating the XM-100

XM-100 provides intuitive control of its various functions via its front panel buttons as shown on the next page, the remote control, and the RS232 port (for local and remote operation). Note that in the event of power loss, the radio will automatically return to its state before power loss.

Basic operation allows the user to:

?Change channels and music categories

?Enter a channel number on the remote to tune to a channel directly