b)Turn the base of the antenna so that the XM logo is facing to the south if you are in the eastern half of the U.S. and to the south/southeast if you are in the western half of the U.S.
c)Bring up the signal strength menu by holding down the power button for 4 seconds and optimize signal strength using the instructions in the next section. Exit signal strength Mode by pressing the power button.
d)If necessary, experiment with different antenna locations near a
For Outdoor installation or indoor wall mounting:
The antenna can also be attached vertically to an external or internal wall if that is more convenient than placing it on a horizontal surface.
a)Holding your antenna up, find a wall location that ensures a strong signal.
b)Attach antenna to the wall using four screws.
c)Tilt the antenna fully back on the base, place the antenna base on the four screw heads with the antenna pivot at the top, and pull down approximately 1/4 inch until the base is firmly secured. Note that the XM logo will be upside down when the antenna is properly installed.
d)Bring up the signal strength menu by holding down the power button for 4 seconds and optimize signal strength using the instructions in the next section. Tilt the antenna away from the wall/base until the signal strength is optimized. Exit signal strength Mode by pressing the power button.
3.Power on your sound system and turn the amplifier to a low volume.
