Antex electronic XM-100 owner manual Forced Tuning, Skip ###? N PWR Toggles

When Setup – CH Skipping is displayed, pressing the Mode button brings up the following menu:

Skip ###? N

PWR Toggles

In the course of using the XM-100 you may find that there are specific channels you prefer not to listen to and would rather skip over. Using XM-100’s SKIP feature, you can program the unit to skip over these channels when scrolling using the up/down buttons or remote control. (Note that you can still access the “skipped” channels using the direct tune method.)

To configure a channel to be skipped when scrolling:

?Use the up/down buttons to scroll to the channel you want to skip (or add back a currently skipped channel).

?Use the POWER button to toggle the status between skipped “Y” or not skipped “N”. “B” indicates the channel is blocked, and therefore will automatically be skipped.

?Add and Skip as many channels as you prefer. When finished, press the MODE button to return to the SETUP display.

Forced Tuning

When Setup – Forced Tuning is displayed, pressing the Mode button brings up the following sub menu structure: