3.SETUP MENU continued …

SETTING UP THE AVM 50

When you enter the Setup Menu, your On-Screen display will show the menu below. Only 8 menu items can be displayed at one time. To go to a submenu, highlight a menu item in red and then press SELECT.

If current settings do not work with your display, use the Front Panel display to view the Setup until making the appropriate selections.

 

 

1.

ANTHEM AVM 50 SETUP

VIDEO OUTPUT

2.

SET TIME / TIMERS

3.

SPEAKER CONFIG

4.

LISTENER POSITION

5.

LEVEL CALIBRATION

6.

SOURCE SETUP

7.

SOURCE PRESETS

8.

ANALOG INPUT LEVELS

9.

ADC / AUDIO OUTPUT

10.

VOLUMES / PATH NAMES

11.

TRIGGER /

IR / RS232

12.

DISPLAYS

/ TIMEOUT

13.

SAVE / LOAD SETTINGS

14.

LOCKOUT / PASSWORDS

SELECT Enters Submenu

3.1VIDEO OUTPUT

Highlighting ‘1. VIDEO OUTPUT’ and then pressing SELECT displays this menu:

1. VIDEO OUTPUT

a. VIDEO OUT CONFIG 1 b. VIDEO OUT CONFIG 2 c. VIDEO OUT CONFIG 3 d. VIDEO OUT CONFIG 4

Video Output Configurations:

The AVM 50 allows you to set four video output configurations – Configuration 1 is the only one that needs to be set in most cases. The rest can be used to match the output refresh rate to source material refresh rates, i.e. 1080p/24, 1080p/50, and 1080p/60 if your display accepts these rates, or with a secondary display that needs different settings – only one display can be used at a time in this case. Output assignment by Source is explained in section 3.6, and on-the-fly selection is explained at the end of section 4.11.

Once entering Configurations 2 through 4, the menu asks whether or not you want to use the same settings as Configuration 1 – the factory default is Yes. If different settings are used, the output changes according to the line that’s highlighted in the VIDEO OUTPUT menu.

Calibration professionals: A program downloadable from our web site, Live Video Settings Editor, allows control via computer and file creation for video processing as described in section 4.11, plus gamma correction (single or separate RGB curves) and custom output resolution and timing.

16