3. SETUP MENU continued …

Procedure for Manual Test Sequence:

•Enter the Setup Menu. Go to ‘5. LEVEL CALIBRATION’ and press SELECT.

•Use the ￿￿buttons to set a. NOISE SEQUENCE to ‘Manual’.

•Press the ￿￿ buttons to go from speaker to speaker.

•As each speaker plays, use the ￿￿buttons to adjust its loudness relative to other speakers.

•Press BACK to stop the test noise.

Procedure for Auto Test Sequence:

•Enter the Setup Menu. Go to ‘5. LEVEL CALIBRATION’ and press SELECT.

•Use the ￿￿buttons to set a. NOISE SEQUENCE to ‘Auto’.

•Press SELECT to start the automatic sequence.

•As each speaker plays, use the ￿￿buttons to adjust its loudness relative to other speakers. After you make an adjustment, the next speaker will play.

•Press BACK to stop the test noise.

29