3. SETUP continued …
Muting (MAIN only):
This eliminates popping sounds that may occur with some digital source components during a bitstream change. If popping is heard when changing chapter on a DVD or channel on a digital satellite receiver or cable box, use Max setting. However, if the beginning of a track is cut off when playing a CD, use Min setting.
EQ (MAIN only):
For sources set to Digital or
buttons to select LF (low frequency) or HF (high frequency), then use the buttons to adjust. In the FM/AM Setup/Presets menu, FM and AM can be adjusted separately. The EQ settings in this menu and the
Choose between Movie or Music configuration as set in the Bass Management menu, or
Room EQ (MAIN only):
To disable room correction equalization performed with the
Video can fall out of synchronization with audio for a variety of reasons. The Statement D2v’s video processing causes video to be delayed by 24 milliseconds, which is less than the duration of one frame, thus considered synchronized. If for whatever reason audio is heard before the corresponding image is seen, you can set up to 170 milliseconds of audio delay. To adjust while watching video see section 4.9.
Example: Set DVD1
•Enter the setup menu. Go to SOURCE SETUP and press SELECT.
•Press the button until you reach DVD1 and press SELECT.
•Press the button until you reach
•Use the buttons to move from digit to digit and the buttons to adjust to 24 ms.
•Press BACK to leave the submenu and return to the main menu.
35