1. INTRODUCTION
The Statement D2v is a
Check that you have received everything listed below and report discrepancies to your dealer as soon as possible. In case they are needed one day, keep the packing materials and the invoice that you received from your authorized Anthem dealer at time of purchase – without it, service will not be provided under warranty.
Packing List:• | Statement D2v | • | FM antenna | • | IR terminal block (on rear panel) | |
• | 2 | Remote controls | • | FM antenna adapter | • | Power cord (North America only) |
• | 4 | AA batteries | • | AM loop antenna |
|
|
• | Software installation CD | • | Microphone and clip | • | Telescopic stand |
• | Serial extension cable | • | USB microphone cable | • | Base |
•Read all precautions and instructions at the beginning of this manual.
•Do not connect power if there are signs of damage to any part of the exterior.
•The front panel power buttons and the rear panel AC switch do not disconnect the product from the AC line. Ensure that the power cord remains readily accessible at all times.
•To connect power, only use the supplied
•Allow adequate ventilation to ensure reliable operation and to prevent overheating. The amount of space required above the unit for radiation depends on ambient air temperature and circulation. Installation inside an unventilated space such as a cabinet with a front that can be closed or a closet is not recommended.
•Failing to comply with any safety instruction, precaution, or warning in this operating manual is in violation of the intended use of the product.
•Anthem and any related party assume no liability for the user’s failure to comply with requirements.
1.2•Disconnect the power cord before connecting or disconnecting any components.
•If the processor was transported or stored in the cold, let it warm to room temperature before use.
•Do not remove the top cover.
•Do not modify the product.
•Due to continuing advances operational characteristics may change. If this manual contains discrepancies please check www.anthemAV.com for the latest manual or software.
1