3.SETUP continued …
Scaler Input (MAIN only):Assign which input is used by the video processor when the source is selected – any HDMI, Component video,
Assign which video input (or None) is used for unprocessed video switching when the source is selected, including in ZONE2, ZONE3, and REC.
Audio In (MAIN only):
There are three input types to choose from – Digital,
In Digital and
•Dig (Digital): Choose any HDMI, coaxial, optical, or the AES/EBU connection. Any digital input can be assigned to multiple sources. This allows, for example, two setups for the same DVD player – one for DVDs using DVD1 source setup, and the other for CD music using CD source setup. Note that Dolby Digital and DTS are transmitted only through a digital connection.
•
•
If Preferred is set to HDMI in menu 1 and HDMI audio is selected here, Scaler Input must also be HDMI.
Auto Digital (MAIN only):If set to Yes, the input type switches to Digital when sensing a digital clock signal from a source and to
Example: Change SAT1 Digital Input to optical.
•Make sure satellite receiver is connected to OPT1 and playing.
•Enter the setup menu. Go to SOURCE SETUP and press SELECT.
•Press the button until you reach SAT1 and press SELECT.
•Press the button until you reach AUDIO IN.
•Use the buttons to change to OPT1 (sound will now be heard).
•Press BACK to leave the submenu and return to the main menu.
Analog Audio:If Audio In is set to analog, assign which input is used – any analog audio input can be used.
34