Chapter 5 Preparation

Using the NP-1 type battery pack

1 Remove the battery holder.

2 Attach the NP-1 type battery case to the unit.

1 Tighten the mounting screws.

2 Tighten the power contact screws.

3 Insert the top of the detached cover in the direction shown by the arrows.

4 Align the holes in the bottom of the cover (metal part)

 

 

with the holes at the bottom of the case, and use the

 

5

screws to attach the case.

 

<Note>

 

3 Set the battery type.

When mounting the battery holder, take care not to pinch

the connecting cord.

 

Select the battery type using the BATTERY SELECT

NP-1 type Battery case

menu item.

This item is selected from the

<BATTERY/TAPE> screen on the VTR FUNCTION page.

1

When using another battery which cannot be selected

using the BATTERY SELECT item setting, select TYPE A

 

 

or TYPE B, and set the items that correspond to the

 

characteristics of the battery.

 

For details, refer to “7-8-4 BATTERY SETTING2.”

 

<Note>

 

 

Address all inquiries concerning the V-mount adapter

4

plate to your dealer.

 

 

23

Using the V-mount type battery pack

Attach the V-mount adapter plate.

Insert it in the direction shown by the arrows, and slide it into place.

59