Chapter 5 Preparation

13 Turn the JOG dial button to move the arrow (cursor) to

Storing the lens file data

 

YES, and press the JOG dial button.

The white shading adjustment values can be stored in the unit

 

ACTIVE now appears on the screen. This indicates that

as lens file data.

 

 

 

the white shading is now being automatically

 

 

 

 

compensated. Upon completion of the adjustments, W-

 

 

 

 

Selecting the file No.

 

 

SHD OK is displayed.

 

 

<Note>

 

 

 

 

1 Perform a menu operation to open the <LENS FILE>

 

Depending on the KNEE settings, “LEVEL OVER” may

 

appear on the screen and white shading compensation

screen from the FILE page, and turn the JOG dial button

 

to move the arrow (cursor) to the FILE NO. item.

 

may not be possible. If this is the case, either stop down

 

 

 

 

 

the lens or set the AUTO KNEE OUTPUT switch to OFF,

2 When the JOG dial button is pressed, the file number

 

then perform a menu operation to open the

 

5

<KNEE/LEVEL> screen from the PAINT screen, select

starts flashing.

Turn the JOG dial button and select the

“OFF” as the MANUAL KNEE item setting, and repeat

lens file (1 to 8) in which the data is to be stored.

steps 4 through 9. After “W-SHD OK” has appeared on

< LENS FILE >

 

 

the display, select “ON” again as the MANUAL KNEE

 

 

 

 

 

item setting.

# FILE NO.

:1

 

 

READ

 

 

 

WRITE

14 When the lens is provided with an extender, turn on the extender function, and repeat steps 7 to 13.

The adjustment values of the two resulting patterns–one when the lens extender is provided and the other when it is not provided–are stored in the unit as the data of one lens file.

TITLE : ************

1:5:

2:6:

3:7:

4:8:

This now completes the white shading adjustments.

The adjustment values are now stored in the non-volatile memory so that even when the unit’s power is turned off, there will be no further need to perform the white shading adjustment.

3 Press the JOG dial button to enter the lens file.

Giving a title to the selected file NO.

4 Turn the JOG dial button to move the arrow (cursor) to the “TITLE:” item.

< LENS FILE >

 

FILE NO.

:1

READ

 

WRITE

 

#TITLE : ************

1:5:

2:6:

3:7:

4:8:

5 When the JOG dial button is pressed, the arrow (cursor) moves to the title input area, and the input mode is established.

< LENS FILE >

 

FILE NO.

:1

READ

WRITE

;

TITLE : ************

1:5:

2:6:

3:7:

4:8:

63