Chapter 5 Preparation

5-3 Audio input signal preparations

Prepare to connect the audio components which will supply the audio signals to the unit.

5-3-1 When using the front microphone

The microphone of the AJ-MC900G mic kit (optional accessory) can be attached to the viewfinder.

1 Open the mic holder.

2 Attach the microphone, and tighten the locking screw.

Locking screw

3 Connect the microphone’s connecting cable to the MIC IN jack on the camera.

MIC IN jack

4 Set the AUDIO IN switch or switches to “FRONT” in accordance with the audio channel or channels whose sound is to be recorded.

5-3-2 When using a wireless receiver

When using a UniSlot wireless receiver

1 Remove the slot cover, insert the wireless receiver, and screw it down.

5

2 Set the AUDIO IN switches to WIRELESS for the audio channels whose audio signals are to be recorded.

AUDIO IN switches

65