MIRACLE STEAMER

TROUBLESHOOTING (continued)

Problem

Possible Cause

Corrective Action

Unit heats but there

Water Line Valve is closed (MS-

Check that the Water Line Valve is Open

is little or no steam

250/255).

 

produced

Filter Strainer is restricted.

Check and clean the Filter Strainer as described in

and/or

 

the Maintenance section of this manual.

Quick disconnect is not fully

Remove and reengage the Quick Disconnect firmly

The product requires

engaged at rear of the unit or is

until a “click” is heard. Replace if damaged.

more steaming than

damaged (MS-250/255).

 

usual.

Low or no water pressure in the

Remove the Quick Disconnect Insert from the rear

 

water line (MS-250/255).

of the unit. While holding over an empty cup, press

 

 

the white plastic tip. Strong, steady water flow

 

 

should be noted. If so, reengage firmly into unit. If

 

 

not present, or pressure is low, contact your mainte-

 

 

nance person or plumber.

 

Improper water pressure to unit (MS-

Verify that a Water Pressure Regulator is installed

 

250/255).

and set to 20-25 PSI.

 

Unit is not being cleaned properly

Clean unit daily and monthly as described in the

 

(daily/monthly).

Maintenance section of this manual.

 

Programming and/or SHO, H2O val-

Reprogram the SHO and H2O values as described

 

ues were adjusted/changed improp-

in the Programming section of this manual.

 

erly.

 

 

Insufficient or excessive calcium/

Verify that thin layer of calcium/mineral deposits

 

mineral deposits on the Generator

is present on the Generator surface. Refer to the

 

surface.

Maintenance section of this manual.

 

Generator surface is bare.

Generator surface must have a thin calcium/min-

 

 

eral coating for proper steaming. Refer to the

 

 

Maintenance section of this manual.

 

Generator Steam Ports are restrict-

Clean the Steam Ports as described in the

 

ed.

Maintenance section of this manual.

 

Generator Cover is warped or loose.

Verify that the Generator Cover wingnut is tight. If

 

 

noticeable steam escapes around the Generator

 

 

Cover, replace the cover.

 

Generator Diffuser is missing.

Install Generator Diffuser or replace if missing.

 

Generator surface temperature is too

Verify Generator surface temperature to be 380-

 

low.

420° F (193 - 215° C).

Excessive con-

Water pressure is too high (MS-

Verify that the Water Pressure regulator is set to 20

densation in Food

250/255).

- 25 PSI. Adjust accordingly.

Compartment.

Programming and or SHO and H2O

Reprogram the SHO and H2O values as described

 

values were adjusted improperly.

in the Programming section of this manual.

Steam coming out

Generator Cover’s wingnut is loose.

Tighten wingnut.

around top covers or

Generator Cover is warped.

Replace Generator Cover.

sides.

 

 

20

P/N 1010699 Rev. M 12/06

Page 20
Image 20
Antunes, AJ MS-150/155 owner manual Troubleshooting

MS-150/155 specifications

The Antunes AJ MS-150/155 series is a premium line of commercial food service equipment designed to meet the evolving needs of the fast-paced food industry. Known for its reliability and efficiency, this series includes innovative features that cater to both high-volume and diverse menu offerings.

One of the standout attributes of the Antunes AJ MS-150/155 is its advanced cooking technology. Equipped with a precise digital control system, it allows for accurate temperature settings and time management, ensuring consistent cooking results with every use. This precision is crucial for maintaining food quality and meeting safety standards, particularly in busy kitchen environments.

The AJ MS-150/155 series incorporates a user-friendly interface with intuitive controls, making it easy for staff to operate even during rush hours. The digital display provides real-time monitoring of cooking processes, reducing the risk of errors and enhancing operational efficiency. Moreover, the units feature programmable cooking cycles, allowing operators to save specific settings for different menu items, thereby streamlining the food preparation process.

Durability is a hallmark of the Antunes brand, and the AJ MS-150/155 does not disappoint. Constructed with high-grade stainless steel, these units are built to withstand the rigors of a commercial kitchen. The materials used not only contribute to the longevity of the equipment but also make cleaning and maintenance straightforward, ensuring that hygiene standards are upheld.

In terms of versatility, the AJ MS-150/155 is suitable for various cooking applications, including toasting, baking, and even grilling. This multifunctionality provides food service operators with the flexibility they need to cater to a broad range of menu options, from sandwiches and wraps to baked goods and snacks.

Energy efficiency is another notable feature of the AJ MS-150/155 series. Designed to minimize energy consumption without compromising performance, the equipment can help businesses reduce their energy costs and environmental impact.

In summary, the Antunes AJ MS-150/155 series stands out as a reliable solution for commercial kitchens seeking efficiency, durability, and versatility. With its advanced technology and user-friendly features, this equipment is poised to enhance food preparation processes and support culinary creativity, making it an invaluable asset for any food service operation.