Troubleshoot | |
|
|
Problem & Question | Possible Solutions |
| |
|
|
Power LED Is Not ON | Make sure the power button is ON and the Power Cord is properly connected |
| to a grounded power outlet and to the monitor. |
|
|
| Is the power cord connected properly? |
| Check the power cord connection and power supply. |
| Is the signal cable connected correctly? |
| (Connected using the signal cable) |
| Check the signal cable connection. |
| If the power is on, reboot the computer to see the initial screen (the login |
| screen), which can be seen. |
| If the initial screen (the login screen) appears, boot the computer in the |
| applicable mode (the safe mode for Windows ME/XP/2000) and then change |
| the frequency of the video card. |
No images on the screen | (Refer to the Setting the Optimal Resolution) |
| If the initial screen (the login screen) does not appear, contact the Service |
| Center or your dealer. |
| Can you see "Input Not Supported" on the screen? |
| You can see this message when the signal from the video card exceeds the |
| maximum resolution and frequency that the monitor can handle properly. |
| Adjust the maximum resolution and frequency that the monitor can handle |
| properly. |
| Make sure the AOC Monitor Drivers are installed. |
| Adjust the Contrast and Brightness Controls. | |
Picture Is Fuzzy & Has | Press to auto adjust. | |
Make sure you are not using an extension cable or switch box. We | ||
Ghosting Shadowing Problem | ||
recommend plugging the monitor directly to the video card output connector | ||
| ||
| on the back . | |
|
| |
Picture Bounces, Flickers Or | Move electrical devices that may cause electrical interference as far away | |
from the monitor as possible. | ||
Wave Pattern Appears In The | ||
Use the maximum refresh rate your monitor is capable of at the resolution | ||
Picture | ||
your are using. | ||
| ||
|
| |
| 50 |
