FEATURE | FUNCTION |
|
|
|
Automatic: The UPS performs a | ||||
| every two weeks thereafter (by default). During the | |||
| operates the connected equipment on battery. |
| ||
| Manual: Press and hold the | button for a few seconds to initiate the self- | ||
| test. |
|
|
|
|
| |||
Cold Start | Supply battery power to the UPS and connected equipment in the absence of | |||
| utility voltage (see Troubleshooting). Press the | button for one second and | ||
| release. The UPS will beep briefly and go quiet. Press and hold the button again, | |||
| but for approximately three seconds. The unit will emit a sustained beep. Re- | |||
| lease the button during this beep. |
|
| |
|
| |||
Diagnostic Utility | The UPS has a diagnostic feature that displays the utility voltage. | |||
Voltage | The UPS starts a | |||
| ||||
| affect the voltage display. |
|
| |
| Press and hold the | button to view the utility voltage bar graph display. | ||
| After a few seconds, this | display on the right of | ||
| the front panel will show the utility input voltage. |
| ||
| Refer to the figure at left for the voltage reading (values are not listed on the | |||
| UPS). |
|
|
|
| The display indicates the voltage is between the displayed value on the list and | |||
| the next higher value (see Troubleshooting). |
| ||
|
|
|
|
|
7