APC 1500 VA Connect Equipment to the UPS, Connect the UPS to the Network if Applicable, Start Up

2: START UP

Connect Equipment to the UPS

Rear Panels
1500 VA, 120 V:	1500 VA, 230 V:

3000 VA, 120 V: 3000 VA, 230 V:

Note:

•The ‘outlet groups’ can be controlled through the network software. See Network Management Card documentation.

•A laser printer draws significantly more power than other types of equipment and may overload the UPS.

Connect the UPS to the Network (if Applicable)

Network Connectors
Serial Port	USB Port	Ethernet Port

Note:

•Use only the supplied cable to connect to the Serial Port. A standard serial interface cable is in- compatible with the UPS. Serial and USB ports cannot be used simultaneously.

•If an optional Smart-Slot accessory is to be used, remove the preinstalled network management card and install it now.

Start the UPS

Attention: Upon utility power connection, the UPS will automatically turn on.

1.Plug the UPS into a two-pole, three-wire, grounded receptacle only. Input Plugs:

1500 VA models: 120 V = NEMA 5-15P; 230 V = Use country specific 10 A with C14 input cords (not supplied).

3000 VA models: 120 V = NEMA L5-30P; 230 V = Use the supplied cords or the country spe- cific equivalent.

4