APC H10 manual Federal Communications Commission FCC Compliance Information

CAUTION: When connecting to the DC Trigger jacks, connect the source of the DC trigger to the IN jack. The OUT jack should be used only as a pass-through. The DC Trigger signal can be short circuited if the input and output cables are reversed. The maximum input volt- age for the DC Trigger is 30VDC. Do not apply an AC voltage to the DC trigger jacks. Failure to comply with this statement may result in equipment damage.

Physical Dimensions (H x W x D)	3.75 x 17 x 9.5”
Weight: Unpackaged / Shipping	16.7 lbs. / 17.5 lbs.
Safety Agency Approvals	UL1449, cUL,
	FCC Part 68 Class B

Federal Communications Commission (FCC) Compliance Information

This device complies with Part 68 and Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. As required, the bottom of this equipment contains, among other information, the Registration Number and Ringer Equivalence Number (REN) for this equipment. If requested, this information must be provided to the telephone company.

- 14 -