6
Remote Control Battery Installation
Your remote control requires two “AAA”batteries (included.)
INSTALLATIONINSTRUCTIONS
Replace the rear cover, by grasping it
and sliding it upwards, towards the top
of the remote.
Insert the two batteries. Make sure the
positive (+) and negative (-) signs on the
remote control and the batteries line up.
Remove the rear cover by pressing firm-
ly in the middle of the cover and sliding
it down, towards to bottom of the
remote. Then, lift the cover off of the
remote control.
To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control for an extended period
of time. Do not mix batteries of different age and type. Always discard of used batteries in a safe manner.
123