Franklin CDR-2041 manual Installing a Book Card, Selecting a Book

Installing a Book Card

Warning: Never install or remove a book card when your BOOKMAN is turned on. If you do, information that you’ve entered in its built-in book, as well as in any other installed book cards, will be erased.

1.Turn your BOOKMAN off.

2.Turn your BOOKMAN over.

3.Align the tabs of the book card with the notches in the slot.

Selecting a Book

If you’ve installed a book card in your BOOKMAN, you can select which book you want to use. Follow these steps.

1.Turn your BOOKMAN on.

2.Press CARD .

3.Press or to highlight a book symbol.

4.Press the book card down until it snaps into place.

➤Removing a Book Card

Warning: When you remove a book card to install another, infor- mation that you entered in the removed book card will be erased.

4. Press ENTER to select it.

➤Resuming Where You Left Off

You can turn off your BOOKMAN at any time. When you turn on your BOOKMAN again, the screen that you last viewed ap- pears.

4