Table/desktop installation

1. Connect the two long telephone line cords to the telephone. How you connect the telephone line cords to the wall is determined by your telephone service. Determine if you have one or two-line telephone wall jacks and if you receive DSL (digital subscriber line) service. If one or more of the telephone lines has DSL service, see Important information for DSL users, pages 6-8. Use only the line cords that come with the phones. If you need additional cords, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

If you have two-line wall jacks, you can just plug the line cords into the wall jacks. Use Illustration A on page 11.

If you have one-line wall jacks, you need to purchase one or two two- line adapters. Adapters are available at retail stores, by visiting our

website at www.telephones.att.com or by calling

1 (800) 222–3111. In Canada, call 1 (866) 288-4268.

You need two adapters if you have four telephone lines and use the AUX jacks (on the back of the telephone) for equipment like fax machines. You will also need an additional short 2- or 4- conductor telephone line cord for this installation. Use Illustration B on page 11.

You need one adapter if you use both AUX jacks for installing your phones. Use Illustration C on page 12.

NOTE: To purchase 2-line adapters (model 16598, part # 89-0071-00), you can visit our website at www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. You can purchase 2-line adapters at some electronic and hardware stores.

10

Page 16
Image 16
AT&T 1070 manual Table/desktop installation, 800 222-3111. In Canada, call 1 866