PROGRAM 5550100

PAUSE

PROGRAM 5550100

TONE

PROGRAM 5550100

FLASH

PROGRAM 5550100

DELETE CHAR

PROGRAM 5550100

CANCEL

One touch

Continued from previous page

Store a signal for switching to temporary tone dialing. If you have dial pulse (rotary) service, this signal is required for some special services. Press [] or [] until you see TONE, then press [ENTER]. A T appears on the screen. All numbers you enter after this will send touch-tone signals during dialing.

You can store the flash signal required by some special services as part of a dialing sequence. Press [] or [] until you see FLASH, then press [ENTER]. An F appears on the screen. Continue storing the number as usual.

To erase the last digit, scroll to DELETE CHAR and then press [ENTER].

-OR-

Press [REMOVE].

To copy the most recently dialed number from redial, press [(AUTO) REDIAL]. You can copy only the last number dialed from this extension to a one-touch location. You cannot copy the other numbers in the redial stack.

To cancel programming, scroll to CANCEL and then press [ENTER].

5.Press the desired one-touch key to store the telephone number in a location.

-OR-

Press [LOWER], then the desired one-touch key to store the telephone number in the lower location.

6.To move to the next feature, press [].

-OR-

To exit, press and hold [ENTER].

31

Page 37
Image 37
AT&T 1070 manual From previous