CENTREX

02 SEC

CSL DELAY RING

Centrex

CSL delay ring

Set the length of time before this phone routes a call to the Centrex console phone. One ring cycle lasts about six seconds.

1.Press [ENTER] on the desired system telephone for the Centrex service (except the console telephone).

2.Press [] or [] until you see CENTREX. Press [ENTER].

3.Press [] or [] until you see CSL DELAY RING.

4.Press [] or [] to choose the desired delay time (2–30 seconds). On the console telephone, choose OFF.

5.To move to MAIN MENU, press [].

-OR-

To exit setup, press and hold [ENTER].

NOTE: If you want the DTAD to answer calls, the CSL DELAY RING time should be longer than the ANSWER DELAY time (page 58) on the same 1080 telephone.

75

Page 81
Image 81
AT&T 1070 manual CSL delay ring