Mitsubishi Electronics WD-65000 manual Advanced Menu Timer

Part III : Setup

Advanced Menu: Timer

Figure 1. Timer selection in the Advanced Menu.

Figure 2. Timer Menu

Timer Menu

(Figure 2)

The timer can be turned On or Off. When On, you need to select the time to turn on,

the day to turn on, and the channel to display. At your pre-selected time, the timer

will turn the TV on, and a message will be displayed, “Press a key for the TV to stay on ”. Any button on the remote control must be pressed within 5 minutes, or the TV will turn itself off.

Set Time

Select the hour and minute, including AM or PM, when the TV is to turn on.

Press { or } to slowly adjust the time. Press and hold { or } to quickly adjust the time.

TIMER

(Figure 1)

The timer will automatically turn the TV on (if it is off) at the time you schedule and select.

The TV’s clock must be set before you can set the timer. If you have not set the clock and/or day, you will see the CLOCK menu instead of the Timer menu.

Set Day

Select the days that the TV will turn on auto- matically. You can select Everyday, Mon-Fri (Monday through Friday), or the individual days of the week.

Input

Select the input to use when the timer turns on the TV. If the TV is already on, the timer will turn the TV to this selected input.

Channel

When Ant-A or Ant-B is the selected input, you may select any memorized channel. The TV will tune to this channel when the timer turns it on.

Timer

39