Mitsubishi Electronics WD-65000 manual Connecting a DVD Player, Connecting an S-Video Device

Part II: Installation

Connecting a DVD Player

TV back panel		DVD Player with Component Video
		(Figure 1)
	HIGH RESOLUTION INPUTS

							PC - 1	COMPONENT			Connect the Component Video cables from
								480i	/ 480p
							VGA / SVGA / XGA	1	2		Y/Cr/Cb or Y/Pr/Pb VIDEO OUT on the back
							1		Y
							2AUDIO-L		Pr
							60 Hz				of the DVD player to COMPONENT-1 or
							AUDIO-R		Pb
							3
			White			Y/G	H
									AUDIO-L		COMPONENT-2 on the TV back panel,
						Pr/R	5AUDIO-L		(MONO)
							4AUDIO-R		AUDIO-R
							V
			Red			Pb/B					matching the correct components:
							DTV
						1080i	/ 720p / 480i /	480p
										1 Y to Y
DVD back panel										2 Cr or Pr to Pr
1			5.1 CH SURROUNDAUDIO	OUT				AC IN		3	Cb or Pb to Pb
	Y	VIDEO		2CH	BITSTREAM/PCM	MITSUBISHI
						DVD PLAYER					Connect a set of audio cables from AUDIO
3	CR	White	CENTER	R		MODEL DD-5000
						MITSUBISHI DIGITAL ELECTRONICS
2	CB		5	L		POWER SUPPLY	120V~ 60Hz
		S	4
		Red				AMERICA, INC.					OUT on the back of the DVD player to
	VIDEO OUT		SUBWOOFER SURROUND FRONT		COAXIAL OPTICAL
Figure 1. Connecting the DVD player.
											COMPONENT AUDIO Input 1 or 2 on the
											TV back panel. The red cable 4 connects
											to the R (right) channel, and the white
See Appendix B, page 59, for component											cable 5 connects to the L (left) channel.
											If you have progressive DVD player, con-
video signal compatibility information.
											nect the cables with same connection.
For digital audio connections, see your
DVD and A/V receiver Owner’s Guides.

Connecting an S-Video Device

Connecting a DVD player

	TV back panel
		HIGH RESOLUTION INPUTS
			COMPONENT
		PC - 1	480i	/	480p	IR - EMITTER
			1	2
		VGA / SVGA / XGA
					Y
		AUDIO-L			1	2	3	4	MONITOR	PIP
1					Pr
		60 Hz								S-VIDEO
		AUDIO-R			Pb
										VIDEO
	Y/G	H			AUDIO-L White					AUDIO-L
2		AUDIO-L			(MONO)					(MONO)
	Pr/R	V			Red					AUDIO-R
	Pb/B	AUDIO-R			AUDIO-R
		DTV					INPUT		OUTPUT
	1080i	/ 720p / 480i /	480p				ANT-A		LOOP	ANT-B
									OUT

S-Video Device

AUDIO OUT AUDIO IN VIDEO OUT

White	L	L	(Y/C)	1
2	1	2
Red	R	R

Figure 2. Connecting an S-Video Device.

S-Video Device (Figure 2)

1 Connect an S-Video cable from VIDEO OUT on the device back panel to VIDEO INPUT-1, INPUT-2, INPUT-3, or INPUT-4 on the TV back panel or INPUT-5 on the TV front panel.

2 Connect a set of audio cables from AUDIO OUT on the device back panel to AUDIO INPUT-1, INPUT-2, INPUT-3 or INPUT-4 on the TV back panel or INPUT-5 on the TV front panel. The red cable connects to the R (right) channel and the white cable connects to the L (left) channel. If your device is mono (non-stereo), connect only the white (left) cable.

or S-Video Device

19