PHONE SETTINGS

TONE

TONE/PULSE

PHONE SETTINGS

ON

HOLD REMINDER

Phone settings

Tone/pulse

Use this feature to choose tone (Touch-Tone) or pulse (Dial-Pulse) dialing. The factory setting is TONE. Change this to PULSE (rotary) only if you do not have touch-tone dialing service.

1.Press [ENTER].

2.Press [] or [ ] until you see PHONE SETTINGS. Press [ENTER].

3.Press [] or [] until you see TONE/PULSE.

4.Press [] or [] to choose TONE or PULSE.

5.To move to the next feature, press [ ].

-OR-

To exit setup, press and hold [ENTER].

HOLD reminder

Use this feature to turn the hold reminder tone on or off. If you selected ON, when an outside call is on hold (see the HOLD section on the user’s manual), a double beep sounds every 30 seconds to remind you.

1.Press [ENTER].

2.Press [] or [] until you see PHONE SETTINGS. Press [ENTER].

3.Press [] or [] until you see HOLD REMINDER.

4.Press [] or [] to choose ON or OFF.

5.To move to MAIN MENU, press [ ].

-OR-

To exit setup, press and hold [ENTER].

36

Page 42
Image 42
AT&T 1070 manual Tone/pulse, Hold reminder