Panasonic KX-TG2336C Installation Installing the Battery in the Handset, Battery strength

Installation

Installing the Battery in the Handset

Insert the battery (1), and press it down until it snaps into the compartment (2). Close the cover.

2

1

To replace the battery:

Press the notch on the cover firmly and slide it as indicated by the arrow. Replace the old battery with a new one

(p. 10). Close the cover and charge the battery for 6 hours.

Battery Charge
Place the handset on the base unit.
Charge for 6 hours before initial use.
Repeat charging will require	OR
approximately the same amount of
charging time (6 hours) if the battery is
depleted completely.
• The unit beeps once, the CHARGE indicator
lights, and “Charging” is displayed.	CHARGE
• When the battery is fully charged, “Charge
	Indicator
completed” is displayed.

Battery strength

Preparation

You can confirm battery strength on the handset display.

Battery strength is indicated by the icons shown in the chart to the right.

Display prompt	Battery strength
5	Fully charged
6	Medium
7	Low
074 (flashing)	Needs to be recharged.
8	Discharged

9