Panasonic KX-TG2336C Making Calls Using the Base Unit Base Unit, Press SP-PHONE

Making Calls

Using the Base Unit Base Unit

1Press [SP-PHONE].

•The SP-PHONE indicator lights.

2Dial a phone number.

3When the other party answers, speak into the MIC (microphone).

4To hang up, press [SP-PHONE].

•The indicator light goes out.

[HOLD/CONF]

[SP-PHONE]

and Indicator

[REDIAL]

MIC

VOLUME [<], [>]

•To switch to the handset while using the base unit speakerphone:

—If the handset is off the base unit, press [C] or [s] on the handset, then press [SP-PHONE]on the base unit.

—If the handset is on the base unit, just lift up.

Hands-free Digital Duplex Speakerphone

For best performance, please note the following:

•Speak alternately with the other party in a quiet room.

•If you or the other party has difficulty hearing, press VOLUME [<] to decrease the speaker volume.

To adjust the speaker volume during a conversation

To increase volume, press VOLUME [>].

To decrease volume, press VOLUME [<].

•There are 8 volume levels. If you try to increase/decrease volume when it is at the maximum/minimum level, the base unit will beep 3 times.

To redial the last number dialed

Press [SP-PHONE], then press [REDIAL].

To put a call on hold

Press [HOLD/CONF] during a conversation.

• The SP-PHONE indicator flashes.

To return to the call, press [SP-PHONE].

•The handset user can also take the call by pressing [C] or [s].

•If another phone is connected on the same line (p. 8), you can also take the call by lifting its handset.

•If a call is kept on hold for 6 minutes, an alarm tone will start to sound. After 4 additional minutes on hold, the call will be disconnected.

24