Panasonic KX-TG2336C Scroll to VM tone detect by pressing d, Off KBack dB SaveL

Voice Mail Service

Setting Voice Mail (VM) Tone Detection Handset

Your telephone company sends special signals (Voice mail tones) to the unit. Press [C], [s] or [SP-PHONE]to listen to the dial tone. If you hear a series of dial tones followed by a continuous dial tone, this indicates that a new message was recorded. Voice Mail detection is preset at the factory to OFF. Minutes after you hang up or after the phone stops ringing, your unit will seize the phone line and check if a message has been recorded. If a new message was recorded at your telephone company, “Voice Mail” will be displayed on the handset, the Ringer/Message Alert indicator on the handset will flash slowly if Message Alert is turned on (p. 20), and the VM indicator on the base unit will flash.

Leave this programming off when:

—you do not subscribe to a voice mail service,

—your telephone company does not send a series of tones, followed by a continuous tone to indicate that you have new voice mail, or

—your phone is connected to a business or office telephone system (PBX).

See below to turn this setting on.

If you are not sure which setting is required, consult your local telephone company or contact the Panasonic Customer Call Centre.

1Press [MENU].

2	Scroll to “Initial setting” by pressing [d]
		Initial setting
	or [B], then press Select.
		KBack dB SelectL
3	Press Select at “Voice Mail”.
		Voice Mail
		KBack dB SelectL
4	Scroll to “VM tone detect” by pressing [d]
		VM tone detect
	or [B], then press Select.
		KBack dB SelectL
5	Select “On” or “Off” by pressing [d] or [B].
		VM tone detect
		:Off
		KBack dB SaveL

6Press Save, then press [OFF].

44