Panasonic KX-TG2336C operating instructions Programmable Settings, Programming Guidelines Handset

Programmable Settings

Programming Guidelines Handset

This unit has several programmable functions which can be selected from the function menu on the display (p. 12).

The soft keys selects the

functions displayed above	Back Select
each soft key.
When “d” or “B” is displayed,
navigator key scrolls through
the menu.

[OFF] exits programming.

[MENU] enters the function menu.

Preparation

How to select a function item from the menu

Make sure the handset and base unit are not being used. The handset must be operated near the base unit and while off the base unit.

1Press [MENU].

• The main menu is displayed (p. 12).

2		Scroll to the desired item by pressing [d] or
			Initial setting
		[B].
			KBack dB SelectL
	3	Press Select to select the desired item.		Back	Select

4If the item has a sub-menu, select the menu item (p. 12). Repeat steps 2 and 3 until the desired item is displayed. If the item has no sub-menu, go to step 5.

5Select the desired setting by pressing [d] or

[B], then press Save to save your setting. Back Save

•A confirmation tone will be heard and the setting will be saved.

6Press [OFF] to exit programming mode.

•To go back to the previous menu, press Back, or press Select while

“---(Goback)----” is displayed. If you press this key in the main menu, the unit will exit programming mode.

•After programming is complete, the display will return to the main menu or the sub-menu depending on which menu the selected item is located. (See the menu table on page 12.)

•You can exit programming mode at any time by pressing [OFF].

•If you do not press any buttons for 60 seconds, the handset will exit programming mode.

•If the unit detects a problem, an error message will be displayed (p. 59) and/or error beeps will sound.

11