Panasonic KX-TG2336C 3334444, Making Calls, To dial after confirming the entered number

Making Calls

To dial after confirming the entered number

1Enter a phone number.

3334444

KClear PauseL

•If you misdial, press Clear. Enter the correct number.

•If a pause is required when dialing, press Pause where needed (p. 51).

•To cancel, press [OFF].

2Press [C] or [s].

3To hang up, press [OFF] or place the handset on the base unit.

To adjust the receiver/ speaker volume during a conversation

There are 3 volume levels for the receiver and 6 volume levels for the speaker.

To increase volume, press [B]. To decrease volume, press [d].

e.g. Receiver volume: High Speaker volume: Level 6

Volume

Low High

K(VE) MuteL

•The display shows the current volume setting.

•If you try to increase/decrease volume when it is at the maximum/ minimum level, the handset will beep 3 times.

To redial the last number dialed

Press [C] or [s], then press [REDIAL].

To redial using the redial list (Memory Redial)

The last 5 phone numbers dialed are stored in the redial list.

1Press [REDIAL].

333-4444 KErase dB

•The last number dialed is displayed.

2Scroll to the desired number by pressing [d] or [B].

•You can also scroll down through the list by pressing [REDIAL].

•To exit the list, press [OFF].

3Press [C] or [s].

•To erase an item, scroll to the item then press Erase.

•If “No items stored” is displayed, the list is empty.

To put a call on hold

1Press [HOLD/INTERCOM] during a conversation.

•“Line on hold.” is displayed.

•To transfer the call to the base unit, see page 40.

2Press [HOLD/INTERCOM] again.

•“Hold” is displayed.

•You can search the Caller List or phone book while a call is on hold. To exit the list, press [OFF]. The call will remain on hold.

To return to the call, press [C] or [s].

•The base unit user can also take the call by pressing [SP-PHONE].

•If another phone is connected on the same line (p. 8), you can also take the call by lifting its handset.

•If a call is kept on hold for 6 minutes, an alarm tone will start to sound and the Ringer/Message Alert indicator will start to flash rapidly. After

4 additional minutes on hold, the call will be disconnected.

22