Panasonic KX-TG2336C Programmable Settings Ringer Tone, Ringer tone, Handset ringer tone Handset

Programmable Settings

Ringer Tone

You can set the handset and base unit ringers to use one of 7 ringer patterns for outside calls. “Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4” are melody patterns. The factory preset is “Tone 1”.

•You cannot change the ringer tone for intercom calls.

•If you subscribe to a Distinctive Ring Service from your telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone 1 to 3). If you select a melody pattern, you will not be able to distinguish lines by their ringers.

•If you select one of the melody ringer patterns, the ringer will continue to sound for several seconds if:

—the caller hangs up before you answer the call, or

—another person answers the call using another phone connected on the same line.

Handset ringer tone Handset

1Press [MENU].

2	Scroll to “Ringer setting” by pressing [d]
		Ringer setting
	or [B], then press Select.
		KBack dB SelectL
3	Scroll to “Ringer tone” by pressing [d] or
		Ringer tone
	[B], then press Select.
		KBack dB SelectL
4	Select the desired ringer tone by pressing [d]
		Ringer tone
	or [B].	1:Tone 1
	• The handset will ring and the ringer tone will	KBack dB SaveL

change. If the ringer volume has been turned off, the handset will not ring (p. 16).

• You can also select the ringer tone by pressing [1] to [7].

5Press Save, then press [OFF].

18