Panasonic KX-TG2336C Special Features Key Tone Handset, Scroll to Key tone by pressing d or B

Special Features

Key Tone Handset

You can select whether or not the handset keys will sound tones (key tone, confirmation tone, error tone). The factory preset is ON.

1Press [MENU].

2	Scroll to “Initial setting” by pressing [d]
		Initial setting
	or [B], then press Select.
		KBack dB SelectL
3	Scroll to “Key tone” by pressing [d] or [B],
		Key tone
	then press Select.
		KBack dB SelectL
4	Select “Off” or “On” by pressing [d] or [B].
		Key tone
		:On
		KBack dB SaveL

5Press Save, then press [OFF].

Re-registering the Handset Handset & Base Unit

If “No link to base. Move closer to base, try again.” is displayed even when using the handset near the base unit, the handset may have lost communication with the base unit. You need to re-register the handset to the base unit.

•Have both the handset and base unit nearby during registration.

•Follow steps 1 and 2 listed below. You have about 1 minute to complete them.

1Base unit: Press and hold [LOCATOR/INTERCOM] until a beep sounds.

• The CHARGE indicator flashes.

2 Handset: Press and hold
	Handset
[FLASH/CALL WAIT] until	Registering
“Handset Registering” is
displayed.
• When registration is complete, a beep sounds	Handset [1]
from the handset.	Registered

•Wait for 20 seconds after registration is complete while the handset establishes communication with the base unit.

•If the handset beeps 3 times and “Error!!” is displayed, an error occurred. Try again from step 1.

•You can stop registration by pressing [OFF] on the handset, and pressing [LOCATOR/INTERCOM] on the base unit.

Advanced Operation

53