Panasonic KX-TG2336C operating instructions Voice Mail Service, Press VM

Voice Mail Service

Base Unit

1Press [VM].

•The base unit is connected to the telephone line and dials the access number (p. 43) in speakerphone mode.

•If the base unit beeps 3 times, a voice mail access number is not stored. To store the number, see page 43.

2Follow the pre-recorded instructions.

3When finished, press [SP-PHONE].

•If the handset and the base unit still indicate that you have new messages even after you have listened to them, turn the voice mail indicators off by pressing and holding [OFF] until the handset beeps. “Voice Mail” will disappear on the handset, the Ringer/Message Alert indicator will go out, and the VM indicator on the base unit will go out.

•If your voice mail service uses a voice mail tone and the recorded message is over 3 minutes long, the handset and base unit may not indicate that you have new messages.

•If your voice mail service uses a voice mail tone, the tone will be heard from any parallel connected phone. If you use another phone to retrieve messages, you have to dial your access number manually.

46