HP TopShot CF040ARBGJ manual Configure IP network settings

Configure IP network settings

Printer sharing disclaimer

HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems and not of the HP printer drivers. Go to Microsoft at www.microsoft.com.

View or change network settings

Use the HP Embedded Web Server to view or change IP configuration settings.

1.From the Home screen on the product control panel, touch the Network button to find the product IP address.

2.To open the HP Embedded Web Server, type the IP address into the address line of a Web browser.

NOTE: You can also access the HP Embedded Web Server from the HP Device Toolbox for Windows or the HP Utility for Mac OS X.

3.Click the Networking tab to obtain network information. You can change settings as needed.

Manually configure IPv4 TCP/IP parameters from the control panel

Use the control-panel menus to manually set an IPv4 address, subnet mask, and default gateway.

1.Touch the Setup button.

2.Scroll to and touch the Network Setup menu.

3.Touch the TCP/IP Config menu, and then touch the Manual button.

4.Use the numeric keypad to enter the IP address, and touch the OK button. Touch the Yes button to confirm.

5.Use the numeric keypad to enter the subnet mask, and touch the OK button. Touch the Yes button to confirm.

6.Use the numeric keypad to enter the default gateway, and touch the OK button. Touch the Yes button to confirm.

124 Chapter 7 Manage and maintain ENWW