11.Grasp the print cartridge by the center handle and remove the protective plastic shield.

NOTE: Do not touch the print cartridge roller. Fingerprints on the roller can cause print-quality problems.

12.Remove the sealing tape from the print cartridge. Place the tape in the print-cartridge box to return for recycling.

13.Grasp the print cartridge by the center handle and insert the print cartridge into the product.

NOTE: Compare the color label on the print cartridge to the color label in the carousel slot to make sure the print cartridge color matches the carousel position. (The black carousel position has no label.)

CAUTION: If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot water sets toner into the fabric.

14.Close the print cartridge door.

NOTE: After closing the print cartridge door, the control panel shows the Calibrating...

message. Allow a few minutes for the product to calibrate.

NOTE: If you need to replace another print cartridge, you must close the print cartridge door before touching the Cartridge Rotate button again.

You do not need to wait for the product to calibrate when replacing the second print cartridge. Instead, touch the Cartridge Rotate button to rotate the carousel into position. After you have replaced the print cartridges, the product calibrates.

138 Chapter 7 Manage and maintain

ENWW