INTRODUCTION (continued)
To Connect the Antenna
|
| |
VHF | OR |
|
UFH |
| |
or Cable |
| |
|
| |
| OR | Antenna adapter |
|
| (not supplied) |
VHF |
|
|
UHF | U/V mixer |
| |
| (not supplied) |
Notes:
1It is recommended that a 75Ω coaxial cable be used in order to eliminate possible interference and noise which may occur due to nearby radio transmissions.
2The antenna cable should not be tied together with other wiring.
3Set up a lightning arrester and check it regularly when an outdoor antenna is used.
Remote Batteries
1Remove the battery compartment lid.
2 Place in two AAA batteries. Make sure the positive + and negative - polarities are correct.
3Reattach the battery lid.
Notes:
1Alkaline batteries are recommended for longer life. Always replace both batteries with fresh ones of the same type.
2Do not expose batteries to fire or disassemble them.
3To avoid battery leakage, remove batteries from the remote control when it is not to be used for a long pe- riod of time or the batteries are exhausted.
11
