Apex Digital GT2715DV CCD/Text switch, TV/Video selection, On-screen display, Stereo seIection

TV FUNCTIONS (continued)

General Operation (continued)

2.To select a channel

1) CH + Press the CH + button to choose higher-numbered channels and

the CH- button to choose lower-numbered channels.

CH -

2)0 ~ 9

100+

Using the Channel Number buttons

To select a one -digit channel number

Press the 0 button, then press another Channel Number button (except 100+) to select a desired number.

To select a two -digit channel number Enter a first-digit, then second-digit.

To select channel number between 100 and 125 in the Cable mode

Press the 100+ button so that “1_ _” appears on the screen, then enter the next digit one and two.

	0		9
	1				18
1		12		124

3)RECAL

4)SCAN

Press the RECALL button and the TV will directly skip back to the previous channel.

Press the SCAN button repeatedly so that “Scan On ”appear on the screen and the TV begins to scan from the current channel.

During scanning, pressing any button can interrupt scanning.

3. CCD/Text switch

Press the CC button to display the current Closed Captions/Text mode on the screen.

CCPress the button again to turn off CCD/Text.

4.TV/Video selection

VIDEO	Press the VIDEO button, and the screen display changes in circular way:
	Channel Number	Video1(S-VHS1)	Video2

To receive signaIs from external equipment, pIease be sure to select a corresponding Video mode.

ln the Video mode, pressing any of the RECALL, CH-/ + buttons can return to the TV mode.

5. On-screen display

Press the DISPLAY button repeatedly in the TV or Video mode to display the current mode on the

DISPLAY screen and turn off the display respectively.

With other OSD, pressing the DISPLAY button first can turn it off.

6. Stereo seIection

In the TV mode, the TV can automaticatly identify MTS stereo modes among Mono, Stereo,Stereo/ SAP and Mono/SAP.

When receiving signals from external equ- ipment in the Video mode, the TV identifies automatically external signals to Stereo.

Press the STEREO button to set input so Stereo, L or R.

Signal Received	Press STEREO button
Mono	Mono
Stereo	Stereo,Mono
Stereo/SAP	Stereo,SAP,Mono
Mono/SAP	Mono, SAP

18