Menu Function Options

Apollo 360 Map Display

Screen This option controls operation of the display backlight, and Controls allows you to adjust display contrast. Turn the SMALL knob to select backlight Off, Lo, MLo, MHi, or Hi intensity levels. This option also allows selection of either

1-Leg or 3-Leg Route Display screens.

Note

You can also control the display backlight using the backlight key at the lower right of the front panel. Press this key repeatedly to switch the backlight intensity through the levels described above.

Turn the LARGE knob to select “CONTRAST.” Adjust display contrast by turning the SMALL knob.

Adjust the contrast to suit your preference and viewing angle. As you make adjustments, the horizontal bar at the bottom of the display shows the current contrast level. “-” indicates lower contrast, while “+” indicates higher contrast. A contrast setting near the middle of the bar is satisfactory in most cases. The contrast setting you select is stored in memory and remains in effect until you change it.

Turn the large knob to highlight the route display selection and the small knob to select between 1-Leg and 3-Leg Route Display screens. The 1-Leg display uses large letters for easier viewing. The 3-Leg display provides more information on a single screen.

Map This option controls what and how information shows on Setups the moving map screens. Select whether or not the Apollo 360 should show a route path or airspaces in the vicinity.

4-4

P/N 560-0119-00