Troubleshooting |
| Apollo 360 Map Display | |
|
|
|
|
| Problem | Possible Cause(s) | Action |
|
|
|
|
| No position | Host navigation | Ensure that host device |
| fix | device hasn’t | is working properly & |
|
| acquired fix yet | in view of navigation |
|
|
| signal input |
|
| No active route | Some host devices |
|
| in host navigation | won’t supply nav. |
|
| device | information unless an |
|
|
| active route is present. |
|
|
| Configure & activate a |
|
|
| route in host device |
|
|
|
|
| Search for | Incorrect | Check “Declutter Maps” |
| nearest | selection of | option as Section 5 |
| waypoints | waypoint types to | describes to verify that |
| reveals too | show after search | desired waypoint types |
| few or |
| to search are “On” |
| wrong types |
|
|
| of waypoints |
|
|
|
|
|
|
| Wrong types | Incorrect | See action above - the |
| of waypoints | selection of | waypoint types you set to |
| show on | waypoint types to | “No” do not show on |
| moving map | show on moving | moving map screens OR |
| screens | map screens | after nearest waypoint |
|
|
| searches |
|
|
|
|
| Airspace | Airspace display | Check “Map Setup” |
| boundaries | on moving map | option as Section 5 |
| missing | screens set to | describes and verify that |
| from | “Off” | “Airspaces” item is set |
| moving map |
| to “Yes” |
| screens |
|
|
|
|
|
|
| Line | Route path | Check “Map Setup” |
| representing | display on | option as Section 5 |
| route path | moving map | describes and verify that |
| on moving | screens set to | “Route Path” item is set |
| map screens | “Off” | to “Yes” |
| is missing |
|
|
|
|
|
|
|
|
|
|
P/N |