Apollo p1 manual Quick On, Timing a Session, Changing the Session Time, Changing the Intensity

Quick On

To turn the light source on or off, push LIGHT.

Timing a Session

To start a timed session, press TIMER. The timer display will flash. Select the desired usage time by pressing the + or - button. After a three-second delay, the light source will automatically turn on and begin counting down.

Changing the Session Time (Diagram 2)

To change the timer while the goLITE is on, press TIMER, then push the + or - button to set the new desired time.

Changing the Intensity

While the light source is on, you can change light intensity by pushing the + or - button. You can choose intensity settings in increments of 10%.

Cancel a Treatment

Press the “LIGHT” button at anytime to cancel a treatment.

Check Clock Time

To check the clock while unit is turned off, push the + button.

Using your goLITE

9