Apollo p1 Creating & Saving Personalized Settings, To Create or Change a Personalized Treatment

Using Your goLITE®

Creating & Saving Personalized Settings

The goLITE P1 will allow you to store up to three different personalized settings (A, B, or C). Each pro- gram can be set to run for a specific time, and intensity. Note: before you can run a personalized setting, you must first program your personal settings into the device.

To Create or Change a Personalized Treatment

Note: Power must be turned on before programming.

1.Press and hold “PROGRAM” until the word (Program) on the display begins to blink.

2.Press “+ -” to choose either A, B, or C for your program.

3.Press “PROGRAM” button again, the word “TIMER” and minutes will begin to blink.

4.Press “+ -” buttons to select the desired time of use.

5.Press “PROGRAM” button again, and the intensity bars will begin to blink.

6.Press “+ -” buttons to select your desired intensity.

7.Press “PROGRAM” button again to store the personalized treatment.

Note: Up to 3 different treatments can be stored or changed by repeating the steps above.

Running a Personalized Treatment

Press “PROGRAM” button and the letter (A, B, or C) will begin to blink. Press the “+ -” buttons to select the program you wish to run. The program will start by pressing “PROGRAM” again, or after a three-second delay.

10